Removing A Phone - D-Link VoiceCenter DVX-2000MS User Manual

Section  - Installation

Removing a Phone

You can remove a phone from the Response Point phone system. You may want to do this if the phone is no longer
™
working, for example. Removing a phone does not change the settings on the phone itself; however, the base unit will
no longer recognize it, and it must be reconfigured if you add it to the phone system again.
If you just want to move a phone to another location, do not remove the phone through Administrator; just unplug it
instead. When the phone is unplugged, the base unit reports that it is no longer responding and flags it on the Phone
System page of Administrator. However, the phone configuration is maintained by the base unit so that when it is
plugged back in, the phone is registered with the base unit as before. No additional configuration is needed.
To remove a phone:
1. Click the Phone System button.
2. In the Tasks panel, click Remove Phone.
3. Click the phone you want to remove, and then click OK.
4. Confirm that you want to remove the phone you selected by clicking Yes in the message box.
D-Link DVX-000MS User Manual