Users; Adding A User - D-Link VoiceCenter DVX-2000MS User Manual

Section  - Installation
Response Point users are listed on the Phone System page, where you can use commands in the Tasks panel to
add, edit, or remove them, as necessary. Users are always associated with an extension number.
You add users to Response Point in two ways. First, when you configure a new phone, using the Configure Phone Wizard,
at least one primary user must be assigned to the new phone. You can also add users at any time on the Phone System
page by clicking Add User, and then entering the appropriate information in the User Properties dialog box.
To add a Response Point user:
1. Click the Phone System button.
2. In the Tasks panel, under Users, click Add user. The New User dialog box will appear
3. On the Identification tab, in the User type box, click Person, Group, Job Role, or Location, as appropriate.
4. In the Name boxes, if you chose the user type Person, type the first and last name, and optional nicknames and
titles of the person who will use this phone. You should specify nicknames and titles if you think callers will use them
when asking for this user.
5. If you chose the user type Group, Job Role, or Location, type the applicable name in the Name box, and type any
other names in the Alternate name 1 and Alternate name 2 boxes.
6. Click OK in the User Properties dialog box.
D-Link DVX-000MS User Manual

Users

Adding a User