Show Snmp View - D-Link DGS-3212SR Command Line Interface Reference Manual

DGS-3212SR Switch CLI Reference

show snmp view

Purpose Used to display an SNMP view previously
created on the switch.
Syntax show snmp view {<view_name 32>}
Description The show snmp view command displays an
SNMP view previously created on the switch.
<view_name 32> − An alphanumeric string of
Parameters
up to 32 characters that identifies the SNMP
view that will be displayed.
Restrictions None.
SNMP Commands
Example Usage:
To show SNMP view:
DGS-3212SR:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree
-------------------- ------------------------- ----------
ReadView 1
WriteView 1
NotifyView 1.3.6
restricted 1.3.6.1.2.1.1
restricted 1.3.6.1.2.1.11
restricted 1.3.6.1.6.3.10.2.1
restricted 1.3.6.1.6.3.11.2.1
restricted 1.3.6.1.6.3.15.1.1
CommunityView 1
CommunityView 1.3.6.1.6.3
CommunityView .3.6.1.6.3.1
Total Entries: 11
DGS-3212SR:4#
View Type
Included
Included
Included
Included
Included
Included
Included
Included
Included
Excluded
Included
57