D-Link DGS-3212SR Command Line Interface Reference Manual page 46

DGS-3212SR Switch CLI Reference
config snmp system_location
Purpose Used to enter a description of the location of the
switch.
Syntax config snmp system_location <sw_location>
Description This command is used to enter a description of
the location of the switch. A maximum of 128
characters can be used.
<sw_location> − A description of the location of
Parameters
the switch. A maximum of 128 characters can
be used.
Restrictions Only administrator-level users can issue this
command.
SNMP Commands
Example Usage:
To configure the switch location for "Taiwan":
.
DGS-3212SR:4#config snmp system_location Taiwan
Command: config snmp system_location Taiwan
Success.
DGS-3212SR:4#
40