D-Link DGS-3212SR Command Line Interface Reference Manual page 78

DGS-3212SR Switch CLI Reference
upload
Purpose Used to upload the current switch settings or the
switch history log to a TFTP server.
Syntax upload [configuration|log] <ipaddr>
<path_filename>
Description This command is used to upload either the switch's
current settings or the switch's history log to a
TFTP server.
configuration − Specifies that the switch's current
Parameters
settings will be uploaded to the TFTP server.
log − Specifies that the switch history log will be
uploaded to the TFTP server.
<ipaddr> − The IP address of the TFTP server.
The TFTP server must be on the same IP subnet
as the switch.
<path_filename> − Specifies the location of the
switch configuration file on the TFTP server. This
file will be replaced by the uploaded file from the
switch.
Restrictions The TFTP server must be on the same IP subnet
as the switch. Only administrator-level users can
issue this command.
Download|Upload Commands
Example Usage:
DGS-3212SR:4#upload configuration 10.48.74.121 c:\cfg\log.txt
Command: upload configuration 10.48.74.121 c:\cfg\log.txt
Connecting to server................... Done.
Upload configuration...................Done.
DGS-3212SR:4#
72