D-Link DGS-3212SR Command Line Interface Reference Manual page 190

DGS-3212SR Switch CLI Reference
create iproute
Purpose Used to create an IP route entry to the switch's IP
routing table.
Syntax create iproute [default] <ipaddr>
Description This command is used to create an IP route entry
to the switch's IP routing table.
default − creates a default IP route entry.
Parameters
<ipaddr> − The IP address for the next hop router.
Restrictions Only administrator-level users can issue this
command.
Routing Table Commands
Example Usage:
To add a static address 10.48.74.121 to the routing table:
DGS-3212SR:4#create iproute 10.48.74.121
Command: create iproute 10.48.74.121
Success.
DGS-3212SR:4#
184