D-Link DGS-3212SR Command Line Interface Reference Manual page 54

DGS-3212SR Switch CLI Reference
disable snmp traps
Purpose Used to disable SNMP trap support on the
switch.
Syntax enable snmp traps
Description This command is used to disable SNMP trap
support on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
SNMP Commands
Example Usage:
To prevent SNMP traps from being sent from the switch:
DGS-3212SR:4#disable snmp traps
Command: disable snmp traps
Success.
DGS-3212SR:4#
48