D-Link DGS-3212SR Command Line Interface Reference Manual page 202

DGS-3212SR Switch CLI Reference
show router_ports
Purpose Used to display the currently configured router
ports on the switch.
Syntax show router_ports {vlan <vlan_name 32>}
{static|dynamic}
Description This command will display the router ports
currently configured on the switch.
<vlan_name 32> − The name of the VLAN on
Parameters
which the router port resides.
static − Displays router ports that have been
statically configured.
dynamic − Displays router ports that have been
dynamically configured.
Restrictions None.
IGMP Snooping Commands
Example Usage:
To display the router ports.
DGS-3212SR:4#show router_ports
Command: show router_ports
VLAN Name : default
Static router port : 2:1-2:10
Dynamic router port :
VLAN Name : vlan2
Static router port :
Dynamic router port :
Total Entries: 2
DGS-3212SR:4#
196