D-Link DGS-3212SR Command Line Interface Reference Manual page 21

DGS-3212SR Switch CLI Reference
show serial_port
Purpose Used to display the current serial port settings.
Syntax show serial_port
Description This command displays the current serial port
settings.
Parameters None.
Restrictions None
Basic Switch Commands
Example Usage:
To display the serial port setting:
DGS-3212SR:4#show serial_port
Command: show serial_port
Baud Rate : 9600
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DGS-3212SR:4#
15