DGS-3212SR Switch CLI Reference
show scheduling
Purpose
Used to display the currently configured traffic
scheduling on the switch.
Syntax
show scheduling
Description
The show scheduling command displays the
current configuration for the maximum number
of packets (max_packets) and the maximum
latency (max_latency) values assigned to the
four priority queues on the switch. The switch's
default max_latency = 0. At this value it will
empty the four hardware queues in order, from
the highest priority (queue 0) to the lowest
priority (queue 3).
Parameters
None.
Restrictions
None.
QOS Commands
Example Usage:
To display the current scheduling configuration:
DGS-3212SR:4# show scheduling
Command: show scheduling
QOS Output Scheduling
MAX. Packets MAX. Latency
------------------- ------------------
Class-0
50
1
Class-1
100
1
Class-2
150
1
Class-3
200
1
DGS-3212SR:4#
122