D-Link DGS-3212SR Command Line Interface Reference Manual page 22

DGS-3212SR Switch CLI Reference
show switch
Purpose Used to display information about the switch.
Syntax show switch
Description This command displays information about the
switch.
Parameters None.
Restrictions None.
Basic Switch Commands
Example Usage:
To display the switch information:
DGS-3212SR:4#show switch
Command: show switch
Device Type : DGS-3212SR Fast-Ethernet Switch
Module Type : DES-332GS 1-port GBIC Gigabit Ethernet
and 1 Stacking Port
Unit ID : 1
MAC Address : 00-80-C8-12-35-40
IP Address : 10.1.1.33 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.00.005
Firmware Version : Build 3.00-B24
Hardware Version : 1A1
Device S|N :
System Name :
System Location :
System Contact :
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
RIP : Disabled
DVMRP : Disabled
PIM-DM : Disabled
OSPF : Disabled
TELNET : Enable (TCP 23)
WEB : Enable (TCP 80)
RMON : Disabled
DGS-3212SR:4#
16