D-Link DGS-3212SR Command Line Interface Reference Manual page 147

DGS-3212SR Switch CLI Reference
show radius
Purpose Used to display the current Radius
configurations on the switch.
Syntax show radius
Description The show radius command is used to display
the current Radius configurations on the switch.
Parameters None.
Restrictions None.
802.1X COMMANDS
Example Usage:
To display Radius settings on the switch:
DGS-3212SR:4#show radius
Command: show radius
Index IP Address Auth-Port
Number
----- ------------------ ---------
1 10.1.1.1 1812
2 20.1.1.1 1800
3 30.1.1.1 1812
Total Entries : 3
DGS-3212SR:4#
Acct-Port Status Key
Number
--------- ----------- ------------
1813 Active switch
1813 Active des3326
1813 Active dlink
141