D-Link DGS-3212SR Command Line Interface Reference Manual page 122

DGS-3212SR Switch CLI Reference
config traffic control
Purpose
Used to configure broadcast|multicast traffic
control.
Syntax
config traffic control [<storm_grouplist>|all]
broadcast [enable|disable]|multicast
[enable|disable]|dlf
[enable|disable]|threshold <value>
Description This command is used to configure broadcast
storm control.
<storm_grouplist> − Used to specify a
Parameters
broadcast storm control group with the syntax:
module_id:group_id.
all − Specifies all broadcast storm control
groups on the switch.
broadcast [enable|disable] − Enables or
disables broadcast storm control.
multicast [enable|disable] − Enables or disables
multicast storm control.
dlf [enable|disable] − Enables or disables dlf
traffic control.
threshold <value> − The upper threshold at
which the specified traffic control is switched on.
The <value> is the number of
broadcast|multicast|dlf packets, in packets per
second, received by the switch that will trigger
the storm traffic control measures.
Restrictions Only administrator-level users can issue this
command.
Broadcast Storm Control Commands
Example Usage:
To configure traffic control:
DGS-3212SR:4#config traffic control 1-3,1-2 broadcast enable
Command: config traffic control 1-1,2-2 broadcast enable
Success.
DGS-3212SR:4#
116