Spanning Tree Commands - D-Link DGS-3212SR Command Line Interface Reference Manual

DGS-3212SR Switch CLI Reference
S
PANNING
The switch supports 802.1d STP and 802.1w Rapid STP. The
spanning tree commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following
table.
Command Parameters
config stp maxage <value 6-40>
hellotime <value 1-10>
forwarddelay <value 4-30>
priority <value 0-61440>
version [rstp|stp]
txholdcount <value 1-10>
fbpdu [enable|disable]
config stp ports <portlist>
cost [auto|<value 1-200000000>]
priority <value 0-240>
migrate [yes|no]
edge [true|false]
p2p [true|false|auto]
state [enable|disable]
enable stp
disable stp
show stp

Spanning Tree Commands

10
T C
REE OMMANDS
Command Parameters
show stp_ports <portlist>
Each command is listed, in detail, in the following sections.
96