D-Link DGS-3212SR Command Line Interface Reference Manual page 130

DGS-3212SR Switch CLI Reference
show 802.1p user_priority
Purpose Used to display the current mapping between
an incoming packet's 802.1p priority value and
one of the switch's four hardware priority
queues.
Syntax show 802.1p user_priority
Description The show 802.1p user_priority command
displays the current mapping of an incoming
packet's 802.1p priority value to one of the
switch's four hardware priority queues.
Parameters None.
Restrictions None.
QOS Commands
Example Usage:
To show 802.1p user priority:
DGS-3212SR:4# show 802.1p user_priority
Command: show 802.1p user_priority
COS Class of Traffic
Priority-0 -> <Class-1>
Priority-1 -> <Class-0>
Priority-2 -> <Class-0>
Priority-3 -> <Class-1>
Priority-4 -> <Class-2>
Priority-5 -> <Class-2>
Priority-6 -> <Class-3>
Priority-7 -> <Class-3>
DGS-3212SR:4#
124