Config Radius - D-Link DGS-3212SR Command Line Interface Reference Manual

DGS-3212SR Switch CLI Reference

config radius

Purpose Used to configure the switch's Radius settings.
Syntax config radius <server_index 1-3> {ipaddress
<server_ip> {ipaddress <server_ip>|key
<passwd 32>|auth_port
<udp_port_number>|acct_port
<udp_port_number>}
Description
The config radius command is Used to
configure the switch's Radius settings.
<server_index 1-3> − Assins a number to the
Parameters
current set of Radius server settings. Up to 3
groups of Radius server settings can be entered
on the switch.
<server_ip> − The IP address of the Radius
server.
key − Specifies that a password and encryption
key will be used between the switch and the
Radius server.
<passwd 32> − The shared-secret key used by
the Radius server and the switch. Up to 32
characters can be used.
default − Returns all of the ports in the range to
their default Radius settings.
auth_port <udp_port_number> − The UDP port
number for authentication requests. The default
is 1812.
acct_port <udp_port_number> − The UDP port
number for accounting requests. The default is
1813.
Restrictions Only administrator-level users can issue this
command.
802.1X COMMANDS
Example Usage:
To configure Radius settings:
DGS-3212SR:4#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DGS-3212SR:4#
140