D-Link DGS-3212SR Command Line Interface Reference Manual page 94

DGS-3212SR Switch CLI Reference
show syslog host
Purpose Used to display the syslog hosts currently
configured on the switch.
Syntax show syslog host {<index 1-4>}
Description The show syslog host command is used to
display the syslog hosts that are currently
configured on the switch.
<index 1-4> − Specifies that the command will
Parameters
be applied to an index of hosts. There are four
available indexes, numbered 1 through 4.
Restrictions None.
Network Monitoring Commands
Example Usage:
To show Syslog host information:
DGS-3212SR:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severiry Facility UDP port Status
------- --------------- -------------- -------- --------
1 10.1.1.2 All
2 10.40.2.3 All
3 10.21.13.1 All
Total Entries : 3
DGS-3212SR:4#
--------
Local0 514 Disabled
Local0 514 Disabled
Local0 514 Disabled
88