Table of Contents
Advertisement
5.3 Connection with Internet Explorer
Open Internet Explorer (IE) and enter your camera IP address in the address bar.
For example, if your camera IP is 192.168.1.108, then enter http://192.168.1.108 in the IE address bar.
Note:
If the connection fails:
- either the camera does not have an IP address in the same segment as the PC (see chapter 4.1.1 to change it),
- or the Internet Explorer security parameters are not set correctly
(see chapter 5.1 to change them).
5.4 Login
- Enter your user name and password.
(Default factory name is admin and password is admin.)
The login type includes: TCP/UDP/Multicast (depending on the device).
IP camera factory default setup:
- IP address: 192.168.1.108.
- User name: admin
- Password: admin
24
Input your IP
address here
Advertisement
Table of Contents
