Annex 6: Routers Configuration - LEGRAND 4 306 41 User Manual

Annex 6: Routers configuration

If you need to access to your device from external network, you will need to set NAT settings on your router.
In the circumstance that your device is behind a router or gateway, you need to open the port on that router for the device
behind it.
Device 1
IP: 192.168.0.108
Port: 37777 (TCP)
and 80 (HTTP)
Device 2
IP: 192.168.0.109
Port: 37779 (TCP)
and 81 (HTTP)
ROUTER NAT Settings
IP Address Private Port Public Port
192.168.0.108 37777
192.168.0.108 80
192.168.0.109 37779
192.168.0.109 81
To access Device 1, input the IP address: http://60.191.94.100
To access Device 2, input the IP address: http://60.191.94.100:81
1- D-LINK Router (interface may very depending of the device)
Log on to the router. Select "Advanced" tab on the top, and click on "Virtual Server" button on the left. The following
page will be displayed. The screen might be very different regarding to the different model of routers.
SWITCH
ROUTER
Local IP: 192.168.0.1
Public IP: 60.191.94.100
Enable/Disable
37777 Enable
192.168.0.108
80 Enable
37779 Enable
192.168.0.109
81 Enable
79 79
Local IP HTTP TCP
Port Port
Device 1
80 37777
Device 2
81 37779
INTERNET
Public IP HTTP TCP
Port Port
60.191.94.100 80 37777
60.191.94.100 81 37779