Table of Contents
Advertisement
2 General Introduction
2.1 Overview
This device integrates traditional camera and network video technology. It adopts audio video data collection, transmission
and storage. It can connect to the network directly without any auxiliary device.
This device uses standard H.264 video compression technology which maximally guarantees the video quality.
It can be used alone or used in a network area. When it is used lonely, it can be connected to the network and used from
a network client-end.
2.2 Features
User Management
Data Transmission
Storage Function
Alarm Function
Network Monitor
Network Management
Peripheral Equipment
Power
PoE
Assistant Function
Different user rights for each group, one user belongs to one group.
The user right can not exceed the group right.
Support cable network data transmission via Ethernet.
Support central server backup function in accordance with configuration and setup
in alarm or schedule setting.
Support record via Web and the recorded file are stored in the client-end PC.
Support local SD card hot swap.
Real-time respond to local alarm input and video detection as user pre-defined
activation setup and exert audio prompt(allow user to pre-record audio file).
Realize real-time video detect such as motion detect, camera masking and video
loss.
Supports one-channel audio/video data transmit to network terminal
Max supports 10 connections.
Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP and etc.
Support web access.
Configuration and management via Ethernet.
Support device management via web.
Support various network protocols.
Support peripheral equipment connection via the RS232 port.
Support serial port (RS232/RS485) transparent data transmission.
External power adapter. Support DC 12V/AC 24V power supply.
Support Power over Ethernet (PoE). Conform to the IEEE802.3af standard.
Connect the device to the switch or the router that supports PoE function to realize
the network power supply.
To guarantee proper performance, make sure the power source can supply at least
10W power.
Day/Night mode auto switch (ICR switch.)
Support system resource information and running status real-time display.
Support log function.
Support video watermark function.
5
Advertisement
Table of Contents
