Table of Contents
Advertisement
11.
Please go to the device and access the MAIN MENU> SETTING> NETWORK> DDNS. Input server IP you get in the
above step. Select the DDNS Type as No-IP DDNS and highlight the icon
function. Now fill the fields as described below, and click OK to save current setup.
• Server IP: Enter the IP noted in step 10.
• Port: Enter the port 80.
• Domain Name: Enter the domain name created in step 8.
• User: Enter your username (email address) created in step 3.
• Password: Enter the password created in step 3.
12.
Now you have c
ompleted device setup. Open Internet Explorer ® in another foreign network with Internet access,
unlike the network where the device is connected to, you need to follow the steps listed below:
1. Enter the address into your browser: http://nome the field created in step 8.
For example: http://vd16s480st. no-ip.biz
2. If the device HTTP port is 80, just type the domain name. Otherwise, enter in the browser address as:
http://nome the field created in Step 8: port number of HTTP.
For example: http://vd16s480st.no-ip.biz:9090
3. Press Enter. The system will ask install application webrec.cab control or not. Please click Yes to perform a
successful connection.
4. If the page does not appear on the computer screen, you need to lower your system safety setup.
From Tools> Internet Options> Security, select Internet and then click Custom Level, you can enable ActiveX
controls. See below . Then open your browser and re-enter the domain name of the device.
in front of Enable to enable the DDNS
67
67
Advertisement
Table of Contents
