Table of Contents
Advertisement
7.3.7 Abnormity
Refer to the following sheet for detailed information.
Parameter
- The abnormal events include: no disk, no space, disk error, net error, offline, IP
conflict.
Event Type
- XXXX Space Alarm: Set the minimum percentage value here.
The device can alarm when capacity is not sufficient.
- Check enable this function.
Normal Out
Corresponding alarm output channel when alarm occurs, there is one channel.
System auto activates channel to record once alarm occurs (for offline type only).
Record channel
Please note you need to go to chapter 7.3.3 record to set current period as auto
record.
The alarm output can delay for the specified time after alarm stops.
Latch
The value ranges from 10s to 300s
System send email to alarm the specified user.
Send email
This function is invalid when network is offline or IP conflict occurs.
Function
54
Advertisement
Table of Contents
