LEGRAND 4 306 41 User Manual page 39

Refer to the following sheet for detailed information
Parameter
Ethernet
DHCP
Device Name
TCP Port
HTTP Port
UDP Port
DNS
Alternative DNS
Max Connection
Network
transmission
QoS
Advance interface
Parameter
Multiple
cast
group
Remote
Host
PPPOE
Select the network card first.
Port 1 is the ethernet port.
Port 2 is the wireless port (if available).
Dynamically get IP address. Get the device IP adress from the server if this
function is enabled.
Device ID in the network.
Default value is 37777.
Default value is 80.
Default value is 37778.
Manually set IP address of DNS.
You need to enable this function if you are inputting the domain name in some
items. Otherwise the system can not parse the domain name.
Simultaneously, network users max amount. The value ranges from 1 to 10.
Set the priority between fluency and video quality or self-adaptive.
System can automatically adjust the bit stream or lower the resolution according
to the network bandwidth.
- Set MULTICAST address and port.
- Enable function.
- Current series IPC does not support this function right now.
- Input the PPPoE user name and password you get from the IPS (internet
service provider) and enable PPPoE function. Save current setup and reboot
the device to get the setup activated.
- Device connects to the internet via PPPoE after reboot. Get the IP address
in the WAN from the IP address column.
Function
Function
39 39