Table of Contents
Advertisement
Refer to the following sheet for detailed information.
Parameter
Channel
Channel Name
Compression
Main Stream
Extra Stream
Audio/Video
Resolution
Frame Rate
Bit Rate Type
Quality
Bit Rate
Recommended Bit
I Frame
Color Setting
Watermark
Cover area (privacy
mask)
Time Title
Channel Title
Save
Refresh
Select a monitor channel.
Display current channel name. You can modify it .
H.264
It includes general stream, motion stream and alarm stream.
Select different encode frame rates form different recorded events.
For example, use high frame rate to record important events, record scheduled
event in lower frame rate and set different frame rates for motion detection
record and alarm record.
Select extra stream to enable the extension stream to monitor.
Main stream: Recorded file only contains video by default. Check the audio box
here to enable audio function.
Extra stream: Recorded file only contains video by default. Check the audio box
here to enable audio function.
There are multiple resolutions. Select from the dropdown list.
For each resolution, the recommended bit stream value is different.
The frame rate may vary due to different resolutions. When the resolution type is
3M, 1-15f/s. For other resolutions 1-25f/s.
There are two options: VBR and CBR.
The value ranges from 1 to 6. The level 6 is the best video quality.
This setting is available only with VBR bit rate
In CBR, the bit rate here is the max value. In dynamic video, system needs to low
frame rate or video quality to guarantee the value.
The value is null in VBR mode.
Refer to recommend bit rate for the detailed information. .
Recommended bit rate value according to the resolution and frame rate set.
Set the P frame amount between two I frames. The value ranges from 1 to 150.
Default value is 50. Recommended value is frame rate *2.
Set video brightness, contrast, hue, saturation and gain.
The value ranges from 0 to 100.
Select watermark bit stream, watermark mode and watermark character.
Default character is Digital CCTV.
Set privacy masks.
System max supports 8 privacy mask zones.
Enable this function to overlay time information in video window.
OSD transparent value ranges from 0 to 255. 0 means complete transparent.
Use the mouse to drag the time tile position.
You can enable this function to overlay channel information in video window.
OSD transparent value ranges from 0 to 255. 0 means complete transparent.
Use the mouse to drag the channel tile position.
Click save button after complete setup for one item, or complete the whole
setups and then click save button.
Click this button to get device latest configuration information.
35
35
Function
Advertisement
Table of Contents
