Table of Contents
Advertisement
Refer to the following sheet for detailed information.
Parameter
Channel
Pre-record
Storage
Setup
Save
Refresh
Note : System does not support regular recording on SD card.
7.2.4 RS232
Select a channel first.
Input pre-record value here. System can record the three to five seconds video
before activating the record operation into the file. (Depends on data size).
System support record/snapshot file local storage mode only.
•
Click set button, to go to the corresponding setup interface.
•
Set schedule period and select corresponding record or snapshot type:
motion detection/snapshot, and alarm/snapshot. System does not support
schedule/snapshot function,
•
Select date (Current setup applies to current day by default. Select all to
apply the setup to the whole week.)
•
After complete setup, go back and click save to save current time period
setup.
Click save button after complete setup for one channel, or complete the whole
setup and click save button.
Click this button to get device latest configuration information.
Function
37
37
l
Advertisement
Table of Contents
