LEGRAND 4 306 41 User Manual page 80

Note :
Do not copy the information in this sample configuration. It is different according the setting on each device.
The picture above shows an example of how to open the service port on router for a device in local network.
- Check the "Enabled" button.
- In "Name" box, type in a name for this router's entry. For example: "myDVR's Remote Service"
- In "Private IP" box, type in the IP address of device which is the IP you put in "IP ADDRESS" field in "Network" setting
menu on device. For example: "192.168.0.102".
- Select "TCP" in "Protocol Type" drop down menu.
- In both "Private Port" and "Public Port", type in the service port number. In above example, it is 4000. The port number
is the port that you put in "TCP PORT" field in "NETWORK" menu on the device.
- Select "Always" button.
After click "Apply", the service port 4000 will be opened on the router for the device on 192.168.0.102.
The device Net View and other client tools will be able to connect to this device from public network by connecting to
the router's IP address.
Follow the same process, add another entry for HTTP Port service. After this service port is open, the web browser client
from public network will be able to connect to this device by connecting to the router's IP address.
80