Table of Contents
Advertisement
3 SMC Router
Log on to the router, select "Advanced Setup" tab on the top, and click "NAT" button on the left panel. Select "Virtual
Server" in the expanded list structure, you will see the following screen.
Notice that it might look very different according to different models of routers.
- In "Private IP" column, put in the last decimal digit of your DVR's IP address.
For example, your device's IP address is 192.168.2.102, so put 102 in this box.
- In "Private Port" column, put in the service port number you put in the DVR network settings. For example: 4000.
- In "Type" column, select the "TCP" radio button.
- In "Public Port" column, put in the same service port number you put in the "Private Port" box, for example, 4000.
Follow the same process, add another entry for HTTP Port on the router.
Click "Apply" button and confirm if it prompts to restart the router. After the new configuration is activated, the web
browser clients or other DVR clients tools from public network will be able to access the device.
82
Advertisement
Table of Contents
