Identity Code; Configuring The Touchpanel - Crestron Isys i/O TPMC-15-CH-L Operation Manual

Touchpanel Media Centers
24 • Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series
Crestron Isys i/O
For pin assignment information, refer to "QM (QM-L versions only)" on page 18.
Refer to page 22 for additional QuickMedia network wiring information.

Identity Code

All equipment and user interfaces within the network require a unique identity code
(Net ID). These codes are two-digit hexadecimal numbers ranging from 03 to FE.
Refer to "Cresnet" on page 28 for instructions on setting the unit's Net ID. The Net
ID of each unit must match an ID code specified in the SIMPL Windows program.
Refer to the latest version of the Crestron Isys i/O™ TPMC-15 & TPMC-17 Series
Programming Guide (Doc. 6350) for details of the SIMPL Windows procedure.

Configuring the Touchpanel

NOTE: The only connection required to configure the touchpanel is power. Refer to
"Hardware Hookup" on page 47 for details.
The TPMC-15 and TPMC-17 are configured from the SETUP MENU.
NOTE: If no project has been loaded, or if an invalid project has been loaded, the
touchpanel displays an error message and defaults to the SETUP MENU screen.
If a project is running, the SETUP MENU can be accessed using one of two
methods:
Via USB Keyboard
1. Attach a USB keyboard as shown in "Hardware Hookup" on page
47.
2. Open the "Validate User Account Info" window (shown below) by
pressing Ctrl+Alt+Shift on the keyboard.
"Validate User Account Info" Window
3. Enter the user account tpmcadmin, and the password tpmcadmin
and click Validate.
NOTE: The password is case sensitive. After logging in, the
password can be changed from the "Security" window. Refer to
page 26 for more information.
™
TPMC-15/17-L Series
Operations Guide - DOC. 6354