Crestron Isys i/O TPMC-15-CH-L Operation Manual page 57

™
Crestron Isys i/O
Operations Guide - DOC. 6354
TPMC-15/17-L Series
"Address Book" Window – Serial Setup
3. After setting the correct parameters, click OK to return to the Crestron
Toolbox main window.
4. Click Tools | Network Device Tree, or click the network device tree icon
to display the devices in the system. Select Serial on COM1 from the
drop down list if it is not already selected. If communication is successful,
the network devices that are connected to the control system are displayed.
Network Device Tree
To view a specific device, expand the network device tree by clicking +.
Expand the network device tree till the device to be managed is selected.
Right-click the desired Net ID to open the sub-menu. This menu provides a
wide range of functions, including; change the Net ID, open text console,
upload project, update firmware, etc.
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 53
Touchpanel Media Centers