Crestron CT-1000 Quick Start

Crestron Touchpanels
This guide covers mounting options and accessories for Series 1000, TPS-2000L, TPS-3100L Series,
®
TPS-4000L Series, Isys TPS-4L/TPMC-4L Series, TPS-12L/15L,17L, and TPMC-15/17-CH/QM-L
touchpanels.
Pre-Construction Options
Pre-construction options (BB, PMK) are
installed prior to hanging drywall, and
require access to an adjacent structural
support (stud). The TMK and MMK acces-
sories are used to correct irregularities in
the holes cut in the drywall.
Post-Construction Options
Post-construction options (WMKT,
WMKM, WMKB) are for mounting to
finished walls or other surfaces where
access to a structural support member
(stud) is not possible or does not apply
(e.g., lectern mount).
1
For details, check the latest revision of the appropriate mounting kit
Installation Guide for your touchpanel. Refer to the tables on Page 2.
QUICKSTART DOC. 6140C (2001953) 03.06
Wallmount Touchpanel Mounting Options/Accessories
Back Box Kit Pre-Construction Mount Kit
(BB)
Use in installations where a back Use in installations where a back
box is either required or box is not required or not
preferred. preferred.
Wall Mount Kit with Trim Ring
(WMKT)
Used to fill in smaller irregularities around
the opening. This option provides a smooth,
finished appearance and is preferred when
wallpaper is hung.
www.crestron.com
©2006 Specifications subject to
change without notice
NOTE: The illustrations in this guide are representative of a mounting option or accessory type. The main
difference in option/accessory types for each touchpanel series is size and, where applicable, the number of
screws required.
Pre-Construction Accessory
(PMK) Trim Mount Kit (TMK)
Used with BB or PMK installations for smaller
irregularities around the opening. This option
provides a smooth, finished appearance and is
preferred when wallpaper is hung.
Wall Mount Kit with Mud Ring Wall Mount Kit - Bracket
(WMKM) (WMKB - LC/CT-1000)
Mounting
Screws
Used to correct larger irregularities
around the opening. This option
requires plastering.
800.237.2041 201.767.3400
Pre-Construction Accessory
Mud Mount Kit (MMK)
Used with BB or PMK installations to fill in
larger irregularities around the opening. This
option requires plastering.
Wall Mount Kit - Bracket
(WMKB - TPS-4L/TPMC-4L)
Mounting Mounting
Brackets Clips
Mounting
Screws
These kits are used to secure the touchpanel directly to the mounting
surface without requiring an internal mounting plate . The mounting
hardware used depends on the touchpanel. After installation, the
mounting screws are hidden by the touchpanel bezel (not shown).