Crestron Isys i/O TPMC-15-CH-L Operation Manual page 52

Touchpanel Media Centers
Hardware Connections for the TPMC-15-QM-L (Shown Without 9-inch Power Cable)
ETHERNET:
10/100 BASE-T
ETHERNET TO LAN
RS-232:
TO PC OR ANY
RS-232 DEVICE
48 • Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series
Crestron Isys i/O
POWER:
FROM PWR OUT
CONNECTOR
(12.5VDC, 8.4A)
USB:
RD
FOR 3 PARTY HEADPHONES TO CONTROL SYSTEM AND
PERIPHERALS OTHER CRESNET DEVICES
NOTE: The TPMC-17-QM-L has the same connections.
When connecting power, Crestron recommends using the included TPMC-L-IMC
Interface Module to bring power from the included power supply to the touchpanel.
The TPMC-L-IMC is connected between the power supply and touchpanel and
allows power lines to be run from a remotely located power supply to the touchpanel
using 14 gauge, stranded, speaker wire as shown in the following diagram.
Hardware Hookup
PWR IN:
FROM EXTERNAL
POWER SUPPLY
™
TPMC-15/17-L Series
PC CARD:
QM IN:
FOR (2) TYPE II CARRIES AUDIO, VIDEO, RGB,
PCMCIA CARDS AND MICROPHONE SIGNALS
(BEHIND COVER)
CRESNET: QM OUT:
CARRIES AUDIO, VIDEO, RGB,
AND MICROPHONE SIGNALS
CABLE CONNECTED TO
PWR PORT ON BOTTOM OF
TOUCHPANEL
(60 ft MAX @ 14 GAUGE x2)
PWR IN:
FROM TPMC-L-IMC
PWR OUT:
TO POWER PORT
ON TOUCHPANEL
TO TOUCHPANEL:
OBSERVE POLARITY
(+ to + and – to –)
Operations Guide - DOC. 6354