Crestron Isys i/O TPMC-15-CH-L Operation Manual page 61

™
Crestron Isys i/O
Operations Guide - DOC. 6354
TPMC-15/17-L Series
TCP/IP Communication
This section explains how to configure a TPMC-15/17 to communicate over Ethernet
using TCP/IP. These procedures assume that the touchpanel has been powered up
and connected properly.
PC-to-touchpanel communications can be implemented over TCP/IP as shown in the
following diagram. TCP/IP is the fastest method of communicating between the PC
and the touchpanel.
Typical Connection Diagram when Uploading a Touchpanel Project or Firmware to the
Touchpanel via TCP/IP
1. To establish TCP/IP communications with the touchpanel, a serial
connection must be established between the PC and touchpanel. Refer to
"Indirect Serial Communication via Control System" on page 52 or "Direct
Serial " on page 54 for instructions.
2. While connected to the touchpanel, select Functions | Ethernet
Addressing. The current IP address, IP mask and default router are
displayed.
"Ethernet Address" Window
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 57
Touchpanel Media Centers