Crestron Isys i/O TPMC-15-CH-L Operation Manual page 29

™
Crestron Isys i/O
Operations Guide - DOC. 6354
TPMC-15/17-L Series
4. When the "TPMC Debug Output" window appears (shown in the
following diagram), select Project | Enter Setup Mode to enter
the SETUP MENU (shown on page 26).
"TPMC-15-QM-L Debug Output" Window
Via Crestron Toolbox
NOTE: The Crestron Toolbox (replacement for Crestron Viewport, you
may continue to use Viewport version 3.109 or later if desired) is a broad-
based software package that accomplishes multiple system tasks, primarily
using an RS-232 or TCP/IP connection between a PC and one or more
Crestron control systems.
NOTE: The minimum version of Crestron Toolbox required to operate
with the TPMC touchpanels is version 1.1.2.0 or later.
1. Establish communication with the touchpanel as described in
"Establishing Communications" on page 52.
2. Right-click on the device and select Functions | Setup Mode....
"Setup/Calibrate" Window
3. Select Enter Setup Mode. The SETUP MENU will be displayed
as shown in the following diagram.
NOTE: Select Exit Setup Mode to exit the SETUP MENU.
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 25
Touchpanel Media Centers