Crestron Isys i/O TPMC-15-CH-L Operation Manual page 63

™
Crestron Isys i/O
Operations Guide - DOC. 6354
TPMC-15/17-L Series
8. Click Tools | System Info to display the "System Info" window. From the
pull-down menu, select the entry created in step 7.
If the touchpanel is to communicate with a control system over TCP/IP, an IP table
must be created on the touchpanel to identify the control system(s) it will
communicate with over TCP/IP.
Use the following instructions to create the IP table.
1. Select Functions | IP Table Setup from the Toolbox menu bar.
"IP Table" Window
2. If the touchpanel already has an IP table, it is displayed at the top of the
window.
3. Click Add Entry to add a new IP table entry or select an existing IP entry
from the list and click Modify Entry. Up to 252 entries can be listed on a
touchpanel's IP table. Click Remove [Del] to remove a selected IP entry or
click Clear List to remove all of the entries from the IP table.
NOTE: IP table entries that have not yet been sent to the device are listed in
Red.
4. Click Load From File... to browse for a saved IP table.
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 59
Touchpanel Media Centers