Recommended Cleaning; Programming; Uploading And Upgrading - Crestron Isys i/O TPMC-15-CH-L Operation Manual

™
Crestron Isys i/O

Programming

Uploading and Upgrading

Operations Guide - DOC. 6354
TPMC-15/17-L Series
2. Loosen and remove the eight screws that secure touchpanel to the mounting
option in use.
3. Using equal pressure, carefully remove the touchpanel from the opening.
4. If necessary, secure and label the attached cables before disconnecting them
from the back of the touchpanel.

Recommended Cleaning

Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid ingress of moisture
beneath the bezels.
For information on programming the TPMC-15 or TPMC-17 touchpanels, refer to
the latest version of the Crestron Isys i/O™ TPMC-15 & TPMC-17 Series
Programming Guide (Doc. 6350).
NOTE: Crestron recommends using the latest programming software and that each
device contains the latest firmware to take advantage of the most recently released
features. Please check the Crestron website (http://www.crestron.com/updates) for
the latest versions of software and firmware. New users are required to register to
obtain access to this site.
Assuming a PC is properly connected to the entire system, Crestron programming
software allows the programmer to upload programs, projects and firmware to the
system and touchpanels after their development. However, there are times when the
files for the program and projects are compiled and not uploaded. Instead, compiled
files may be distributed from programmers to installers, from Crestron to dealers,
etc. Even firmware upgrades are available from the Crestron website as new features
are developed after product releases. In those instances, one has the option to upload
via the programming software or to upload and upgrade via the Crestron Toolbox.
NOTE: Refer to the note on page 25 for important information regarding
compatible versions of Crestron Toolbox and Viewport.
The following sections define how one would upload a SIMPL Windows program to
the control system, upload a VT Pro-e project, or upgrade the firmware of the
TPMC-15/17. However, before attempting to upload or upgrade, it is necessary to
establish communications between the PC and the touchpanel.
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 51
Touchpanel Media Centers