Crestron Isys i/O TPMC-15-CH-L Operation Manual page 59

™
Crestron Isys i/O
Operations Guide - DOC. 6354
TPMC-15/17-L Series
3. Click the Address Book icon
Book to open the Address Book. The Address Book allows you to maintain
a list of accessible control systems and network devices. You can establish a
session with any or all of the devices in the address book (provided the PC
has a valid connection to each Cresnet or Ethernet network).
4. Select the device from the Address Book or click Add Entry and type a
name for the new device.
5. Select RS232 as the Connection Type and select the serial settings of the
device. This sets the PC to the same serial settings. Enter the settings and
click OK.
For touchpanels, the default settings are:
•
Port = COM 1
•
Baud Rate = 15200 (or select Auto-Detect)
•
Parity = None
•
Data Bits = 8
•
Stop Bits = 1
•
Hardware Handshaking (RTS/CTS) not enabled
•
Software Handshaking (XON/XOFF) not enabled
Crestron Toolbox Address Book Setup
6. Select Tools | System Info or click the System Info icon
Select Touchpanel Direct from the drop down list if it is not already
selected. If communication is successful, the "System Info" window
displays the operating system, Cresnet ID, connection parameters, memory
usage, and hardware information.
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series • 55
Touchpanel Media Centers
, or select Tools | Manage Address
.