Appendix B: Installation Of Optional Pushbuttons - Crestron STX-1700CXPW Operation Manual

Wall Mount 2-Way RF Wireless Touchpanel

Appendix B: Installation of Optional Pushbuttons

38 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW
The STX-1700CXPW is supplied with ten optional pushbutton switches, blank
buttons, and a bezel to accommodate the switches. As a further option, custom
engraved black buttons (1700C-BTNB) or silver buttons (1700C-BTNS) can be
designed and purchased via the Crestron Engraver software. Version 2.3.0.0 or later
is available from the Crestron website.
Perform the following to install pushbuttons on the STX-1700CXPW. Follow these
same basic procedures to replace the blank buttons with the optional engraved
buttons. A #1 Phillips screwdriver is required. Refer to the illustration below.
1. Place the touchpanel face down on a clean work surface.
2. Remove the four screws securing the front bezel to the base. Holding the
bezel to the base, return the unit to its normal position and lift the bezel
from the base.
3. Assemble the supplied membrane switches to the pushbutton sets. Notice
that the pushbutton sets fit snugly on the membrane switches. (Refer to the
following Notes.)
4. Put the assembled pushbuttons and switches in place (refer to the following
Notes), and place the new bezel in position.
NOTE: The rear of the pushbuttons are marked 1-5 TOP and 6-10 TOP to ensure
correct orientation when installed. Do not remove the plastic frame connecting the
buttons together.
NOTE: Carefully position the switch/pushbutton assemblies on the printed circuit
boards–edges should be aligned–and place the bezel over the pushbuttons to hold
them in place.
5. Hold the bezel in position and turn the unit over on its face.
6. Reinstall the four screws to secure the bezel to the base. Tighten the screws,
being careful not to strip the threads.
7. Verify that the pushbuttons function properly.
Optional Pushbutton Installation Diagram
Bezel
5
Crestron STX-1700CXPW
Screw
Bottom view
Pushbuttons
Membrane
Switches
10
Operations Guide - DOC. 6249A
Screw