Crestron STX-1700CXPW Operation Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Touch Panel
  5. STX-1700CXPW
  6. Operation manual
Crestron STX-1700CXPW Operation Manual

Crestron STX-1700CXPW Operation Manual

Wall mount 2-way rf wireless touchpanel
Hide thumbs Also See for STX-1700CXPW:
Table of Contents

Advertisement

Quick Links

Download this manual
Crestron STX-1700CXPW
Wall Mount 2-Way RF Wireless Touchpanel
Operations Guide

Advertisement

Table of Contents
loading

Related Manuals for Crestron STX-1700CXPW

Summary of Contents for Crestron STX-1700CXPW

  • Page 1 Crestron STX-1700CXPW Wall Mount 2-Way RF Wireless Touchpanel Operations Guide...
  • Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.

  • Page 3: Table Of Contents

    Crestron STX-1700CXPW Contents Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW Introduction ... 1 Functions and Features ... 1 Specifications ... 4 Physical Description... 5 Industry Compliance ... 7 Setup ... 7 Applying Power... 7 Docking the STX-1700CXPW ... 8 Undocking the STX-1700CXPW ... 9 Identity Codes...

  • Page 5: Wall Mount 2-Way Rf Wireless Touchpanel: Stx-1700Cxpw

    The STX-1700CXPW is a two-way, radio frequency (RF), compact color touchpanel that, when used with the supplied DA-1700CW docking assembly and BB-1700CW back box, is wall mounted and provides a user interface to a Crestron control system (herein referred to as the Cresnet docking assembly, which docks the touchpanel.
  • Page 6 (IEEE) and is part of a series of wireless specifications together with 802.11, 802.11a, and 802.11g. The STX-1700CXPW touchpanel is not “Wi-Fi compatible.” It does not comply with the 802.11 specifications, nor can it communicate with 802.11 devices. It is, however, considered “Wi-Fi friendly,”...
  • Page 7 4 (France, Spain, Japan, and Canada) are intended for use in Cresnet systems outside the US. If you have two or more Crestron wireless RF devices in the Cresnet system, they should all be set to the same band. If your system includes non-Crestron RF devices, set the Crestron RF devices to a different band than the non-Crestron devices to minimize the possibility of interference between them.

  • Page 8: Specifications

    Wall Mount 2-Way RF Wireless Touchpanel Specifications The table below provides a summary of specifications for the STX-1700CXPW. Specifications of the STX-1700CXPW Touchpanel 4 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW SPECIFICATION Power Options ST-BTPN AC: Domestic External Adapter...

  • Page 9: Physical Description

    RF performance. Refer to “Identity Codes” on page 11 for details. The latest versions can be obtained from the Crestron website. Refer to NOTE after last footnote. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product Catalog for a complete list of 2-Series control systems.
  • Page 10 Refer to “Programming Cable” on page 28 for details and pinouts of the cable used for programming and uploading. 6 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW Crestron STX-1700CXPW Operations Guide - DOC. 6249A...

  • Page 11: Industry Compliance

    Docking Assembly Domestic External Power Pack, or International External Power Pack The latest revision may have a revision letter after the document number (i.e., 6088A). the touchpanel. Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 7 DOCUMENT MODEL NUMBER* ST-BTPN...

  • Page 12: Docking The Stx-1700Cxpw

    (located on the rear of the touchpanel) into DA-1700CW directly behind the front panel. 2. Refer to the diagram below. Make sure that the STX-1700CXPW is squarely seated in DA-1700CW, and press upper edge of touchpanel inward to dock the touchpanel. The touchpanel will snap into position.

  • Page 13: Undocking The Stx-1700Cxpw

    Electrical Undocking of Touchpanel Remove STX-1700CXPW Manual Undocking of Touchpanel The STX-1700CXPW can be undocked manually. The only tool required is a long- reach (minimum 4-1/2 inches from tip to handle base) #1 flat or Phillips screwdriver. Remove Access Hole Plug Operations Guide –...
  • Page 14 Wall Mount 2-Way RF Wireless Touchpanel Insert Screwdriver Lower Screwdriver Handle 10 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW Crestron STX-1700CXPW 2. As shown below, insert a long-reach screwdriver into the access hole at a downward angle (approximately 10 contacts the manual unlatch tab.

  • Page 15: Identity Codes

    Re-Install Access Hole Plug Identity Codes The STX-1700CXPW touchpanel uses distinct types of identity (ID) codes for recognition within a Cresnet system: Cresnet identity (Net ID) for instances when the touchpanel is wired to the Cresnet system, and RF ID for those instances when the touchpanel communicates with the Cresnet system via the RF gateway.

  • Page 16: Configuring The Touchpanel

    16 possible RF channels ranging from 0 to F (hexadecimal number). Having multiple channels available allows for multiple gateways, and therefore many multiple touchpanels, to be used in a given project without signal interference. The channel ID assignment of the TPS-RFGWX is viewed/changed in the Crestron Viewport software utility. Band The ability to specify one of the ten bands (frequency ranges) designated for communication within the 2.4 GHz spectrum makes it possible to minimize...

  • Page 17: Calibration Menu

    NOTE: For convenience, the current CRESNET ID setting is displayed in the lower left corner. NOTE: All touchpanel settings are automatically saved in non-volatile memory. Operations Guide – DOC. 6249A Wall Mount 2-Way RF Wireless Touchpanel Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 13...
  • Page 18 The RF ID consists of a one-digit hexadecimal number. The touchpanel can be set to one of fifteen numbers; “1” is shown as an example in the illustration and is the default. The RF ID setting should match the value assigned to the STX-1700CXPW touchpanel definition in the SIMPL Windows program.
  • Page 19 RF gateway. Band In the table, a bullet (•) indicates channels that are used by the STX-1700CXPW. The unmarked channels can be used by other devices communicating near the Cresnet system, thus minimizing interference.
  • Page 20 When the touchpanel is activated, the first page of the project appears. The specified time is displayed in minutes. The default POWER DOWN 16 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW Brightness From the SETUP MENU, press the Brightness button to open the SCREEN SETTINGS –...

  • Page 21: General Use And Safety

    There is no delay from Standby mode. NOTE: This touchpanel does not include a built-in option to power up on the last page viewed prior to power down. To power up on the last page viewed, you must give the pages discrete join numbers and track them with SIMPL Windows logic.

  • Page 22: Programming Software

    Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account. You can create a program that allows you to set up the STX-1700CXPW to operate a Crestron control system using the Crestron programming tools Crestron SystemBuilder™...

  • Page 23: Programming With Simpl Windows

    If not, refer to the extensive help information provided with the software. NOTE: In the following description, the PRO2 control system is used. NOTE: The STX-1700CXPW can operate as a wired panel when set correctly in the SIMPL program. This is recommended to troubleshoot the program code and to eliminate wireless/RF configuration issues before running the program in wireless mode.
  • Page 24 Wall Mount 2-Way RF Wireless Touchpanel C2Net-Device Slot in Configuration Manager To incorporate an STX-1700CXPW into the system and have it operate either as a wired Cresnet device (in the wall-mount docking assembly) or as a wireless RF device (when undocked), the program needs to be designed for a dual configuration:...
  • Page 25 Double-click the STX-1700 (Cresnet) icon in the upper pane to open the “Device Settings” window. This window displays STX-1700 (Cresnet) device information. Select the Net ID tab to change the touchpanel Net ID, as shown in the following graphic. “Device Settings” Window for the STX-1700CXP (Cresnet) Similarly, double-click the BB/DA-1700CW and STX-RFGWX icons in the upper pane to open their respective “Device Settings”...
  • Page 26 The signal type is displayed on the Status Bar when the signal is highlighted. For additional information, refer to Doc. 6120, Crestron SIMPL Windows Symbol Guide. It may be downloaded from the Crestron website (...
  • Page 27 STX-1700CXPW Input/Output Signals The STX-1700CXPW symbol provides up to 4000 digital joins, up to 1024 analog joins, and up to 127 serial output joins and 255 serial input joins. The programmer selects the signal types by clicking on the appropriate button at the top of the Symbol Detail view when programming the panel.

  • Page 28: Programming With Vt Pro-E

    Device extenders provide additional logic and functionality to a device. The Poll Manager and Sleep/Wake Manager symbols are device extenders for touchpanels. For the STX-1700CXPW in wired mode only, the Poll Manager takes the touchpanel on and off line during polling by the control system. In wireless mode, Sleep/Wake Manager suspends and restores operation of the touchpanel.

  • Page 29: Reserved Join Numbers

    Assigning 17509 (Out of Range) to a page, sub page or button activates the page, subpage or button when the STX-1700CXPW goes out of range. "I" indicates that pressing a button with this join number commands the touchpanel to perform the function. "O" indicates feedback to the display (all actions are local to the touchpanel, no information is transmitted).

  • Page 30: Uploading And Upgrading

    Crestron e-Control Reference Guide (Doc. 6052) or the respective Operations Guide for the control system. These documents are available from the Crestron website. Refer to the figure on the next page for a typical connection diagram when uploading files.
  • Page 31 Crestron STX-1700CXPW NOTE: You can also dock the STX-1700CXPW in the DA-1700CW to upload or upgrade the panel. However, Crestron recommends that you use the connections for uploading or upgrading that are described on the next page. Typical Connection Diagram when Uploading...
  • Page 32 3. Attach the network connector end of the ST-CBL to the connector labeled NET on the control system. 4. Attach the appropriate Crestron external power pack to the touchpanel and plug it into an outlet. At the PC, make sure that no programs accessing the COM port of the PC are running.
  • Page 33 RTS/CTS is selected. Click the OK button to save the settings and close the window. 8. Proceed to “Uploading a VT Pro-e Project” on the next page or “Firmware Upgrade” that begins on page 31, as appropriate. Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 29...

  • Page 34: Uploading A Vt Pro-E Project

    2. As shown below, select File Transfer | Send Touchpanel (alternatively, depress Alt+T) from the Viewport menu. 3. As shown below, select the Net ID of the STX-1700CXPW and then click OK. The “Touchpanel Transfer” window appears (refer to graphic below).

  • Page 35: Firmware Upgrade

    2. As shown below, select File Transfer | Update Touchpanel/Keypad Firmware from the Viewport menu. 3. As shown on the next page, select the Net ID of the STX-1700CXPW and then click OK. Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 31...
  • Page 36 Wall Mount 2-Way RF Wireless Touchpanel “Select Network ID” Window Select CSF File 32 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW Crestron STX-1700CXPW 4. As shown below, select the firmware (CSF) file and click Open. The transfer will complete automatically.

  • Page 37: Problem Solving

    Problem Solving Troubleshooting The table below and on the next page provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. NOTE: To minimize system diagnostics and troubleshooting, Crestron recommends defining the touchpanel as a wired unit in SIMPL Windows, then test functionality as a wired network device prior to testing the TPS-RFGWX transceiver operations.

  • Page 38: Out Of Range Feature

    The out of range feature is always active. It is up to the programmer to provide an indication on the touchpanel. When the STX-1700CXPW is out of range, it displays an out of range indication of your choice (refer to “Reserved Join Numbers” on page 25), and the touchpanel does not respond.

  • Page 39: Further Inquiries

    For assistance in your local time zone, refer to the Crestron website (http://www.crestron.com/) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.

  • Page 40: Appendix A: Optimum Rf Reception Guidelines

    NOTE: Check any 802.11b equipment operating near the Cresnet system to see that it is using only channels that are not being used by the STX-1700CXPW touchpanel. If necessary, change the touchpanel’s band setting to avoid interference. Refer to “ADDITIONAL RF SETUP”...
  • Page 41 Wall Mount 2-Way RF Wireless Touchpanel Building Top of gateway Building RF GATEWAY - 2 WAY PW R N ET CRESTRON Front of gateway Building Top of gateway Antenna Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 37 Antenna Antenna ANTENNA TPS-RFGWX...

  • Page 42: Appendix B: Installation Of Optional Pushbuttons

    As a further option, custom engraved black buttons (1700C-BTNB) or silver buttons (1700C-BTNS) can be designed and purchased via the Crestron Engraver software. Version 2.3.0.0 or later is available from the Crestron website.

  • Page 43: Software License Agreement

    This Agreement may only be modified by a writing signed by an authorized officer of Crestron. Updates may be licensed to You by Crestron with additional or different terms. This is the entire agreement between Crestron and You relating to the Software and it supersedes any prior representations, discussions, undertakings, communications or advertising relating to the Software.
  • Page 44 “applets” incorporated into the Software), the accompanying media and printed materials, and any copies of the Software are owned by Crestron or its suppliers. The Software is protected by copyright laws and international treaty provisions. Therefore, you must treat the Software like any other copyrighted material, subject to the provisions of this Agreement.

  • Page 45: Return And Warranty Policies

    CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
  • Page 46 Wall Mount 2-Way RF Wireless Touchpanel Crestron STX-1700CXPW This page intentionally left blank. 42 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW Operations Guide - DOC. 6249A...
  • Page 47 Crestron STX-1700CXPW Wall Mount 2-Way RF Wireless Touchpanel This page intentionally left blank. Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXP • 43 Operations Guide – DOC. 6249...
  • Page 48 Crestron Electronics, Inc. Operations Guide - DOC. 6249A 15 Volvo Drive Rockleigh, NJ 07647 12.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

Table of Contents