Installation - Crestron TPMC-4SMD-FD Installation & Operation Manual

4.3" Designer Touch Screen
24 • 4.3" Designer Touch Screen: TPMC-4SMD-FD
TPMC-4SMD-FD with No-Button Covers

Installation

The TPMC-4SMD-FD touch screen installs simply and cleanly into a standard
electrical box.
The TPMC-4SMD-FD is supplied with screws for installation into an electrical box.
Mounting in a US Electrical Box
To mount the TPMC-4SMD-FD into an electrical box, use the following procedure:
1. Insert a small slot head screwdriver into the hole shown in the following
illustration and gently separate the back of the TPMC-4SMD-FD.
Insertion Point for Separation of Back Panel
Insert screwdriver to separate back of TPMC-4SMD-FD
2. Use the two of the four included #06-32 x 1 1/2" screws (2007254) to attach
the back panel to a 1-gang electrical box or use all four to attach to a 2-gang
electrical box. Refer to the following illustrations.
Crestron TPMC-4SMD-FD
Installation & Operations Guide – DOC. 7174F