Table of Contents
Advertisement
Crestron STX-1700CXPW
Setup
Operations Guide – DOC. 6249A
Wall Mount 2-Way RF Wireless Touchpanel
Industry Compliance
As of the date of manufacture, this unit has been tested and found to comply with
specifications for CE marking and standards per EMC and Radio Communications
Compliance Labeling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. The equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and transceiver.
■
Connect the equipment into an outlet on a circuit different from that to which the
transceiver is connected.
■
Consult the dealer or an experienced radio/TV technician for help.
Applying Power
The touchpanel can be powered via the ST-BTPN battery pack, the DA-1700CW
docking assembly, or the external power pack. Each of these items has an Operations
Guide which details proper usage. Refer to the table below for the required document
number.
STX-1700CXPW Power Source Options
POWER SOURCE OPTION
Battery Pack**
Docking Assembly
Domestic External Power Pack, or
International External Power Pack
*
The latest revision may have a revision letter after the document number (i.e., 6088A).
** The battery pack does not "trickle" charge when the external power pack is used to power
the touchpanel.
Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 7
DOCUMENT
MODEL
NUMBER*
ST-BTPN
6088
DA-1700CW
6104
PW-1215
5764
PWI-1215
5765
Advertisement
Table of Contents
