Undocking The Stx-1700Cxpw - Crestron STX-1700CXPW Operation Manual

Wall mount 2-way rf wireless touchpanel

Hide thumbs Also See for STX-1700CXPW:

Table of Contents

Crestron STX-1700CXPW

Operations Guide – DOC. 6249A

Wall Mount 2-Way RF Wireless Touchpanel

Undocking the STX-1700CXPW

During normal operation, the DA-1700CW unlatches the STX-1700CXPW

electrically via the control system program. When the touchpanel is unlatched, it

snaps outward slightly, and then may be removed by hand. The control system

program defines the method (i.e., touchpanel button) of unlatching.

Electrical Undocking of Touchpanel

1. Via the touchpanel and/or control system program, unlatch the

touchpanel.

2. Pull the upper edge of the touchpanel outward and remove the

touchpanel.

Remove STX-1700CXPW

Manual Undocking of Touchpanel

The STX-1700CXPW can be undocked manually. The only tool required is a long-

reach (minimum 4-1/2 inches from tip to handle base) #1 flat or Phillips screwdriver.

1. Refer to the diagram below. At top-center of the front panel, remove

the manual unlatch access plug from the access hole.

Remove Access Hole Plug

Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 9

Table of Contents