Crestron ST-1550 & ST-1550C Contents SmarTouch STS SmarTouch STS Description Functional Description Physical Description General Use and Safety Recommended Touchpanel Cleaning Applying Power Configuring the Touchpanel Calibration Preferences Menu Power Management Advanced Settings Internal Scheduler Button Sequence Development Scheduling a Sequence/Button Press...
SmarTouch STS Description Functional Description The SmarTouch STS touchpanels are Crestron’s six inch touchscreen control panels that can be used in either a Cresnet remote control system or as part of the SmarTouch STS. These touchpanels provide a means of user interface via one-way RF communication.
SmarTouch STS Touchpanel Physical Views A battery compartment is located on the underside of the unit. The compartment holds one Crestron ST-BTP, rechargeable power pack. There are also four rubber feet on the underside of the unit for stability and to prevent slippage.
Applying Power The touchpanel can be powered via an external AC power pack, while resting in the ST-DS, or via the ST-BTP. Each of these supplied items have their own Operations Guides which details proper usage. Refer to the table below for the required document number.
SmarTouch STS Touchpanels To configure the touchpanel, it may be necessary to access a series of setup screens prior to viewing run-time screens that are loaded into the touchpanel for normal operation. The Opening Screen, shown below, appears when a finger is held to the touchscreen for approximately three seconds as power is applied.
To obtain the Preferences Menu, shown after this paragraph, touch the Preferences button from the Preferences and Settings Menu. Many options for setting parameters of the touchpanel are available from the Preferences Menu and are explained in the following paragraphs. After these parameters have been set, select the Return button, located at the bottom of the Preferences Menu.
Page 10
If a screen page in your customized program employs a clock display or if the software’s scheduler is utilized, the touchpanel’s internal clock and date setting must be set. To set date and time parameters select the Clock Adjust button located in the Preferences Menu and display the Clock Adjust Screen, shown below.
Power, Contrast, and Backlight (PCB) Screen Power The touchpanel battery life can be lengthened by turning off the backlight when the touchpanel is inactive. Two buttons, Off and Standby, located in the left column of the PCB Screen are available to conserve power. The Off button completely shuts down the touchpanel so that no power is drawn from the ST-BTP, ST-DS, or external AC power pack.
ST-1550C to save the new settings. Touch the RETURN button, located in the bottom right corner of the screen, to display the Preferences and Settings Menu. For the ST-1550, simply touch the SAVE TIMEOUTS and RETURN button.
Advanced Settings Screen Internal Scheduler Crestron offers an internal scheduler feature built into the touchpanel. There are actually two parts to the internal scheduler: developing a button sequence and scheduling a button sequence/function. Each part can be utilized independently of the other or combined.
“scratch” schedule time and date to the current time. Then use the increment/decrement buttons as described in the next step to make adjustments. 10 • SmarTouch STS Crestron ST-1550 & ST-1550C 1. Touch the “Schedule Event” button. 2. Touch a button that has a programmed sequence or one that initiates a specific function.
Consult your dealer if you have any questions. Introduction The SmarTouch STS a Crestron radio-frequency (RF) wireless control system designed for numerous applications ranging from boardroom to complete home automation. Electronic devices or subsystems can be controlled from anywhere via the wireless user interface.
Page 16
5. Apply power to the touchpanel. Consult the appropriate document listed in “Applying Power” on page 3. - If the external AC power pack is used, attach it to the touchpanel and plug into outlet. - If the ST-DS is used, rest touchpanel in station and plug into outlet.
Crestron ST-1550 & ST-1550C Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact your dealer. Troubleshooting Table Touchpanel display is dark. Touchpanel display is dark or too light. Unexpected...