Uploading A Vt Pro-E Project - Crestron STX-1700CXPW Operation Manual

Wall Mount 2-Way RF Wireless Touchpanel
A compiled VT Pro-e file has the
extension .vtz
30 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW

Uploading a VT Pro-e Project

To upload a compiled VT Pro-e project to the STX-1700CXPW, complete the
following steps.
1. Make sure that "Communication Settings" which begins on page 26 has
been performed.
2. As shown below, select File Transfer | Send Touchpanel
(alternatively, depress Alt+T) from the Viewport menu.
Select Send Touchpanel
3. As shown below, select the Net ID of the STX-1700CXPW and then
click OK. The "Touchpanel Transfer" window appears (refer to
graphic below).
"Select Network ID" Window
"Touchpanel Transfer" Window
4. Click Browse. The "Open" window appears as shown on the next page.
5. Select the VT Pro-e (.vtz) file and click Open. The transfer completes
automatically.
Crestron STX-1700CXPW
Operations Guide - DOC. 6249A