Table of Contents
Advertisement
Wall Mount 2-Way RF Wireless Touchpanel
Pushbutton Layout and Join
Number Assignment
24 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW
Device Extenders
Device extenders provide additional logic and functionality to a device. The Poll
Manager and Sleep/Wake Manager symbols are device extenders for touchpanels.
For the STX-1700CXPW in wired mode only, the Poll Manager takes the touchpanel
on and off line during polling by the control system. In wireless mode, Sleep/Wake
Manager suspends and restores operation of the touchpanel. To add device extenders,
right-click the device symbol in Program View, select Insert Device Extender, and
select the desired device extender. For additional information about Device
Extenders, refer to the latest version of the Crestron SIMPL Windows Symbol Guide
(Doc. 6120), or the on-line help included with SIMPL Windows.
Programming with VT Pro-e
Control screen variations incorporating two- and three-dimensional graphics and text
are possible and can be created with VT Pro-e, a design and programming
Windows
-based software program. A set of pages, which make up a project, can be
designed for each application. Each touchpanel can be organized with the ideal,
color-oriented control environment with custom control graphics: icons, two and
three-dimensional buttons, and floor plans. The project is uploaded to the
touchpanel's flash PROM. The touchpanel uses the project until another is uploaded
from the PC. The PC may be disconnected from the control processor except when
uploading a project.
For additional software information, refer to the help file provided with the software.
The latest version of VT Pro-e can be obtained from the Crestron website.
Optional Pushbuttons
If the optional ten "hard" pushbuttons are installed, you can use these buttons to
access any frequently used commands (refer to "Appendix B: Installation of
Optional Pushbuttons"). Each button has a permanently fixed digital join number;
refer to the illustration shown to the left. The sequence of digital join numbers is (top
to bottom) 1 through 5 on the left side and 6 through 10 on the right side.
NOTE: A user may not want the display to come on after a pushbutton is pressed
when the unit is off. The Startup Preference option allows the user to select whether
the touchpanel's display comes on or stays off after a pushbutton is pressed. For
more information, refer to "Startup Preference" on page 16.
NOTE: To program a quick pushbutton to flip a page (change a screen) on the
STX-1700CXPW, go to the Hard Keys tab of the "Project Properties" window in
VT Pro-e. Select a button from the Button drop-down list, and then select the desired
page from the Page Flip drop-down list. When the button is pressed, the page is
displayed.
The quick pushbuttons can also be programmed to do a page flip via SIMPL
Windows.
Crestron STX-1700CXPW
Operations Guide - DOC. 6249A
Advertisement
Table of Contents
