Table of Contents
Advertisement
Crestron STX-1700CXPW
DIAGNOSTICS MENU
Operations Guide – DOC. 6249A
Wall Mount 2-Way RF Wireless Touchpanel
timeout is 30 minutes. It adjusts in one-minute increments from 1 to 10, in ten-
minute increments from 20-120.
NOTE: Power Down Timeout should be set low to maximize battery life. However,
Power Down Timeout should be set greater than Standby Timeout. Otherwise, the
Standby Timeout is meaningless.
NOTE: When the panel is powered down, it will take about 1.5 seconds to power up
and respond to a button press. There is no delay from Standby mode.
NOTE: This touchpanel does not include a built-in option to power up on the last
page viewed prior to power down. To power up on the last page viewed, you must
give the pages discrete join numbers and track them with SIMPL Windows logic.
NOTE: If the external AC power pack is attached to the touchpanel and plugged
into an active AC receptacle or if the touchpanel is docked in the docking assembly
(DA-1700CW), the panel does not power down when the power down timeout is
achieved. Recall that the purpose of this timeout is to maximize battery life. Standby
timeout still functions.
Press Return to save the settings and return to the SETUP MENU.
DIAGNOSTICS Menu
The Diagnostics button from the MAIN MENU should only be used under
supervision from a Crestron customer service representative during telephone
support. Many options available from the DIAGNOSTICS MENU, shown to the left,
are numeric in nature and their interpretation is beyond the scope of this manual.
General Use and Safety
WARNING: To avoid shock hazard and possible damage to the unit, do not use the
touchpanel in the rain or expose it to unnecessary moisture.
Recommended Touchpanel Cleaning
Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. The surrounding plastic
enclosure may not provide a completely watertight seal. Therefore, apply cleaning
solution to the cloth rather than the surface of the touchscreen. Wipe touchscreen
clean and avoid leakage of moisture beneath panels.
Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 17
Advertisement
Table of Contents
