Table of Contents
Advertisement
Wall Mount 2-Way RF Wireless Touchpanel
Programming Software
The easiest method of
programming, but does not
offer as much flexibility as
SIMPL Windows.
18 • Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron's True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.
You can create a program that allows you to set up the STX-1700CXPW to operate a
Crestron control system using the Crestron programming tools Crestron
SystemBuilder™ and SIMPL Windows. These tools are intended for users with
different levels of programming knowledge. The flexibility of each tool is
proportional to the degree of programming expertise (i.e., the more flexible, the
more a programmer needs to know and account for). Of course, one can initiate
programming using the easiest method (SystemBuilder) and use advanced
techniques that are available from SIMPL Windows to customize the job.
®
VT Pro-e is a Windows
compatible software package for creating Crestron
touchpanel screen designs. Refer to "Programming with VT Pro-e" on page 24 for
additional details regarding VT Pro-e.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
The following are recommended software version requirements for the PC:
•
SystemBuilder version 1.02 or later. Requires SIMPL Windows and
Crestron Engraver. Requires SystemBuilder templates 1.01 or later.
•
SIMPL Windows version 2.05.22 or later.
Requires SIMPL+ Cross Compiler version 1.1.
•
Crestron Database version 16.2.1 or later. Required by SIMPL
Windows.
•
VisionTools Pro-e version 3.2.1.8 or later. Used for graphical
touchscreen design.
•
(Optional) Crestron Engraver version 2.3.0.0 (only required if using
SystemBuilder or if optional hard buttons and bezel are installed, and
1700C-BTNB or 1700C-BTNS engraveable button kits are purchased).
Programming with the Crestron SystemBuilder
The Crestron SystemBuilder offers automatic programming for such residential and
commercial applications as audio distribution, home theater, video conferencing, and
lighting. The interface of this tool guides you through a few basic steps for
designating rooms and specifying the control system, touchpanels, devices, and
functionality. The Crestron SystemBuilder then programs the system, including all
touchpanel projects and control system logic.
Crestron STX-1700CXPW
Operations Guide - DOC. 6249A
Advertisement
Table of Contents
