Table of Contents
Advertisement
Crestron STX-1700CXPW
Wall Mount 2-Way RF Wireless
Touchpanel: STX-1700CXPW
Introduction
Operations Guide – DOC. 6249A
Wall Mount 2-Way RF Wireless Touchpanel
Functions and Features
The STX-1700CXPW is a two-way, radio frequency (RF), compact color touchpanel
that, when used with the supplied DA-1700CW docking assembly and BB-1700CW
back box, is wall mounted and provides a user interface to a Crestron
control system (herein referred to as the Cresnet
docking assembly, which docks the touchpanel. The docking assembly provides
operating power and hard-wire communications with a standard Cresnet system, and
recharges the Crestron High Performance Rechargeable Power Pack (ST-BTPN) that
is supplied with the touchpanel. Refer to the latest revisions of the BB-1700CW Wall
Mount Back Box Installation Guide (Doc. 6105) and the DA-1700CW Docking
Assembly Operations and Installation Guide (Doc. 6104).
NOTE: The DA-1700CW and BB-1700CW are also available separately. Contact
Crestron customer support for more information.
Functional Summary
•
5.7" (14.48 cm) active color matrix display
•
320 x 240 screen resolution
•
63MIPs ColdFire processor running Crestron Isys
•
16-bit non-palette graphics
•
64,000-color Crestron Isys engine
•
4 MB of flash memory (approx. 3MB for user display lists)
•
8 MB of SDRAM
•
Long-life NiMH battery
−
Fast charging
−
No battery memory
•
"Wi-Fi friendly" operating frequency selection to avoid interference
•
Compatible with TPS-RFGWX RF gateways that are not Wi-Fi friendly. *
*Refer to "Gateway Compatibility" on page 3 for details.
Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW • 1
®
remote
®
system). The back box holds the
®
-generation firmware
Advertisement
Table of Contents
