Video Input Setup; Rgb Setup - Crestron CNX-DVP4 Operation Manual

Crestron CNX-DVP4
Operations Guide – DOC. 8170A
Example, entering a horizontal resolution of 875:
DVP4>output 875
875 is not in the CNX-DVP4 table of Standard
Horizontal Resolutions.
You can set a Custom Horizontal Resolution by
typing: Output 1 875
NOTE: In this example, the CNX-DVP4 prompts you with the output number (1)
for horizontal resolution.
But you must know all the other parameters to make it function properly.

Video Input Setup

NOTE: Make sure you perform the Video Output Setup procedure first (refer to
page 28).
NOTE: Crestron recommends that you setup all RGB, S and Composite video
sources. For simplicity, the following procedure uses two video sources (VGA input
is connected to RGB 1, S-Video input is connected to Video 1) and user supplied
video pattern screens.

RGB Setup

NOTE: RGB video is setup using the Lock Sync, Color, Size and Position buttons
(bottom of Setup options screen, refer to page 28).
Lock Sync – a vertical (alternating black/white lines) line pattern screen is
recommended.
NOTE: The Lock Sync button only appears for RGB Video
Size – a vertical/horizontal line grid screen is recommended.
Position – a vertical/horizontal line grid screen is recommended.
Color – color bar and gray scale screens are recommended.
1. Select the Select Input button from the Setup Options screen (refer to page
28). The RGB/Video/S-Video buttons appear (refer to the following
graphic).
Digital Video Processor
Digital Video Processor: CNX- DVP4 • 31