Table of Contents
Advertisement
Digital Video Processor
SIMPL Windows Detail View
68 • Digital Video Processor: CNX-DVP4
6. Do the following in SIMPL Windows:
a.
Set the COM port (A-D) for 9600 baud, 8 bits,1 stop bit, No parity.
b. Add the MOUSE COMMAND to serial text-i1 in CNX-DVP4 Slot-01 C21-TPS.
NOTE: Touchpanel text-i1 is RGB-1. If you want the mouse command on RGB-2,
place serial text on text-i2. For RGB-3 place the serial text on text-i3, and so on.
c.
Add the helper symbol to the CNX-DVP4 by using the following procedure:
i.
Open Edit Preferences.
ii. Select the General tab and select the Special mode from the Symbol set.
Crestron CNX-DVP4
Operations Guide – DOC. 8170A
Advertisement
Table of Contents
Troubleshooting
