Mouse Awareness - Crestron CNX-DVP4 Operation Manual

Digital Video Processor Crestron CNX-DVP4
Remote Processing Mode CNX-DVP4 in SIMPL Windows' Program View of the PRO2
Slot 2: C2I-COM5-232 of ID 54 contains Ports A-E, CNX-DVP4 Two-way serial
drivers (A-D are for Com 1-4 ports, E is for Touchscreen/Mouse port). To change
RS-232 settings, double-click on a port to open the "Device Settings" window.
Slot 2: C2I COM5-232

Mouse Awareness

Any window on the CNX-DVP4 may be made "mouse-aware" by assigning for
PAD-AREA, just as we already do on existing TPS panels, and enabling the
Touch/Pad Area check box. Refer to "Appendix F: Connecting a Mouse" on page 85
for additional mouse information.
Touch/Pad Area Enabled in VT Pro-e "Video Properties" Window
But the CNX-DVP4 is different, in that there is more than one window being used
and the mouse packets must be sent to a PC (or any device with a video or RGB
40 • Digital Video Processor: CNX-DVP4
Operations Guide – DOC. 8170A